Product Description

Mission DTH drilling Carbide hard mining hammer rock drill bits

Product Description

KINGDRILLING hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a spline drive for rotating the bit in the ground. Drill bits are available in different sizes and different styles so they can drill a wide range of hole sizes.

Rock drill bits Shank type:M3,M4,M5,M6,M8,M1,M12

DTH hammer bits hole diameter: 3”, 4”, 5”, 6”, 8”(85mm-350mm).

 

Product features: 
DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance.

Technical Date

3 Inch Hight Air Pressure DTH bits
Model	Bit Dia.(mm)	NO. X    Button Dia.		NO.Air    Holes(PCS)	Weight(KG)
		Gauge	Front
MDHM3-85	85	6*Φ13	4*Φ12	2	4.5
MDHM3-90	90	6*Φ14	4*Φ12	2	4.7
MDHM3-95	95	6*Φ14	4*Φ13	2	4.9
MDHM3-100	100	6*Φ14	5*Φ12	2	5.0
MDHM3-105	105	6*Φ14	5*Φ13	2	5.5
4 inch high air  pressure DTH bits
MDHM4-105	105	6*Φ14	5*Φ13	2	6.0
MDHM4-110	110	7*Φ14	6*Φ13	2	6.2
MDHM4-115	115	7*Φ14	6*Φ13	2	6.6
MDHM4-120	120	8*Φ14	7*Φ13	2	7.0
MDHM4-127	127	8*Φ14	7*Φ13	2	7.4
5 inch high air pressure DTH bits
MDHM5-135	135	7*Φ18	6*Φ14	2	12.5
MDHM5-140	140	7*Φ18	7*Φ14	2	13.5
MDHM5-146	146	7*Φ18	7*Φ14	2	14.0
MDHM5-152	152	8*Φ18	8*Φ14	2	14.4
MDHM5-165	165	8*Φ18	8*Φ16	2	15.0
6 inch high air pressure DTH bits
MDHM6-152	152	8*Φ18	7*Φ16	2	22.0
MDHM6-165	165	8*Φ18	8*Φ16	2	23.0
MDHM6-171	171	8*Φ18	8*Φ16	2	24.0
MDHM6-190	190	9*Φ18	9*Φ16	3	25.0
MDHM6-203	203	9*Φ18	11*Φ16	3	28.0
8 inch high air pressure DTH bits
MDHM8-305	305	12*Φ18	29*Φ16	4	95.0
MDHM8-203	203	10*Φ18	10*Φ16	2	35.0
MDHM8-216	216	10*Φ18	12*Φ16	2	40.0
MDHM8-241	241	12*Φ18	18*Φ16	2	54.0
MDHM8-254	254	12*Φ18	21*Φ16	3	57.0
MDHM8-305	305	12*Φ18	29*Φ16	4	77.0
10 inch high air pressure DTH bits
MDHM10-254	254	12*Φ18	20*Φ16	3	90.0
MDHM10-305	305	12*Φ18	36*Φ16	4	102.0
MDHM10-311	311	12*Φ18	36*Φ16	4	104.0
MDHM10-318	318	12*Φ18	38*Φ16	4	106.0
MDHM10-330	330	14*Φ18	42*Φ16	4	112.0
12 inch high air pressure DTH bits
MDHM12-305	305	12*Φ18	36*Φ16	4	152.0
MDHM12-311	311	12*Φ18	36*Φ16	4	158.0
MDHM12-330	330	16*Φ18	42*Φ16	4	165.0
MDHM12-356	356	16*Φ19	48*Φ16	4	178.0
MDHM12-381	381	16*Φ19	48*Φ18	4	195.0
MDHM125-305	305	12*Φ18	36*Φ16	4	170.0
MDHM125-311	311	12*Φ18	36*Φ16	4	173.0
MDHM125-330	330	16*Φ18	42*Φ16	4	182.0
MDHM125-356	356	16*Φ19	48*Φ16	4	191.0
MDHM125-381	381	16*Φ19	48*Φ18	4	200.0

Our Advantages as below:

1. High quality steels materials. Steel is from CZPT and Tungsten carbide are YK05, or T6 from Element Six in Germany
2. Kingdrilling DTH tools are forged by advanced electron-hydraulic forging hammer.
3. Advanced heat-treatment equipment: multipurpose CZPT heat treatment.
4. Completed moulding (tooling ) departments with many molds available.
5. Professional R&D team,completed quality system.
6. Strict Quality-Check Systems.

 

How to order:

Shank Type + Head Diameter + Face Design + Button Shape

 

FAQ:

1. How to order the products?

A: Please send the inquiry with detail item description or with Model number.

 

2. Can I expect a quality products?

A: Yes. mature production technology ensuring the quality satisfy international request.

 

3. How to control quality?

A: We have our own experienced QC team,there will be strict inspection and testing for each order before shipping out.

 

4. Competitive price:

A: KINGDRILLING factory can supply you the lowest price due to direct sale to customers without distributor.

 

5. What is the Application?

Mining, Quarrying, Tunneling, Construction, Geological Exploration, Water-well Drilling, Oilfield & Gas Industries.

 

6. Product feature

Kingdrilling DTH tools are forged by advanced electron-hydraulic forging hammer, and harness process is managed by multipurpose CZPT heat treatment.

 

7. How to choose the suitable head face of the DTH drill bit?

a. Concave:

Suitable for all kinds of formation, especially for deep well drilling, perpendicularity of the hole is wonderful.

b. Convex: 

Suitable for the formation of moderate hardness stratum, drilling efficiency is good, borehole perpendicularity is moderate.

c. Flat:

Suitable for special hard formation stratum, especially for fracture, crack spacing and complex formation drilling effect is very good, has the good perpendicularity of the borehole.

Product Application:

About our Company 
Kingdrilling Machinery Co. , Ltd is established in 2005 years. Located in HangZhou East Lake High-tech Development Zone, is 1 of the most important manufacturers specialized in researching and producing Casing drilling system, DTH hammer, DTH bit, thread DTH bits, taper DTH bits, coupling sleeve, Anchor, Shank adapter, coal picks and so on.

Relying on the university resources and talent advantages in Optical Valley region, combining with multiple laboratories in universities, we focused on developing the newest products system.

Transport:

Package and Delivery:
Packed by Carton or Wooden cases.

Delivery:

1. Goods in stock can be delivered within 5 days.
2. DTH Bits production time is about 15 days.
3. DTH Hammer product time is about 30 days.

More products:

 

Types of Splines

There are 4 types of splines: Involute, Parallel key, helical, and ball. Learn about their characteristics. And, if you’re not sure what they are, you can always request a quotation. These splines are commonly used for building special machinery, repair jobs, and other applications. The CZPT Manufacturing Company manufactures these shafts. It is a specialty manufacturer and we welcome your business.

Involute splines

The involute spline provides a more rigid and durable structure, and is available in a variety of diameters and spline counts. Generally, steel, carbon steel, or titanium are used as raw materials. Other materials, such as carbon fiber, may be suitable. However, titanium can be difficult to produce, so some manufacturers make splines using other constituents.
When splines are used in shafts, they prevent parts from separating during operation. These features make them an ideal choice for securing mechanical assemblies. Splines with inward-curving grooves do not have sharp corners and are therefore less likely to break or separate while they are in operation. These properties help them to withstand high-speed operations, such as braking, accelerating, and reversing.
A male spline is fitted with an externally-oriented face, and a female spline is inserted through the center. The teeth of the male spline typically have chamfered tips to provide clearance with the transition area. The radii and width of the teeth of a male spline are typically larger than those of a female spline. These specifications are specified in ANSI or DIN design manuals.
The effective tooth thickness of a spline depends on the involute profile error and the lead error. Also, the spacing of the spline teeth and keyways can affect the effective tooth thickness. Involute splines in a splined shaft are designed so that at least 25 percent of the spline teeth engage during coupling, which results in a uniform distribution of load and wear on the spline.

Parallel key splines

A parallel splined shaft has a helix of equal-sized grooves around its circumference. These grooves are generally parallel or involute. Splines minimize stress concentrations in stationary joints and allow linear and rotary motion. Splines may be cut or cold-rolled. Cold-rolled splines have more strength than cut spines and are often used in applications that require high strength, accuracy, and a smooth surface.
A parallel key splined shaft features grooves and keys that are parallel to the axis of the shaft. This design is best suited for applications where load bearing is a primary concern and a smooth motion is needed. A parallel key splined shaft can be made from alloy steels, which are iron-based alloys that may also contain chromium, nickel, molybdenum, copper, or other alloying materials.
A splined shaft can be used to transmit torque and provide anti-rotation when operating as a linear guide. These shafts have square profiles that match up with grooves in a mating piece and transmit torque and rotation. They can also be easily changed in length, and are commonly used in aerospace. Its reliability and fatigue life make it an excellent choice for many applications.
The main difference between a parallel key splined shaft and a keyed shaft is that the former offers more flexibility. They lack slots, which reduce torque-transmitting capacity. Splines offer equal load distribution along the gear teeth, which translates into a longer fatigue life for the shaft. In agricultural applications, shaft life is essential. Agricultural equipment, for example, requires the ability to function at high speeds for extended periods of time.

Involute helical splines

Involute splines are a common design for splined shafts. They are the most commonly used type of splined shaft and feature equal spacing among their teeth. The teeth of this design are also shorter than those of the parallel spline shaft, reducing stress concentration. These splines can be used to transmit power to floating or permanently fixed gears, and reduce stress concentrations in the stationary joint. Involute splines are the most common type of splined shaft, and are widely used for a variety of applications in automotive, machine tools, and more.
Involute helical spline shafts are ideal for applications involving axial motion and rotation. They allow for face coupling engagement and disengagement. This design also allows for a larger diameter than a parallel spline shaft. The result is a highly efficient gearbox. Besides being durable, splines can also be used for other applications involving torque and energy transfer.
A new statistical model can be used to determine the number of teeth that engage for a given load. These splines are characterized by a tight fit at the major diameters, thereby transferring concentricity from the shaft to the female spline. A male spline has chamfered tips for clearance with the transition area. ANSI and DIN design manuals specify the different classes of fit.
The design of involute helical splines is similar to that of gears, and their ridges or teeth are matched with the corresponding grooves in a mating piece. It enables torque and rotation to be transferred to a mate piece while maintaining alignment of the 2 components. Different types of splines are used in different applications. Different splines can have different levels of tooth height.

Involute ball splines

When splines are used, they allow the shaft and hub to engage evenly over the shaft’s entire circumference. Because the teeth are evenly spaced, the load that they can transfer is uniform and their position is always the same regardless of shaft length. Whether the shaft is used to transmit torque or to transmit power, splines are a great choice. They provide maximum strength and allow for linear or rotary motion.
There are 3 basic types of splines: helical, crown, and ball. Crown splines feature equally spaced grooves. Crown splines feature involute sides and parallel sides. Helical splines use involute teeth and are often used in small diameter shafts. Ball splines contain a ball bearing inside the splined shaft to facilitate rotary motion and minimize stress concentration in stationary joints.
The 2 types of splines are classified under the ANSI classes of fit. Fillet root splines have teeth that mesh along the longitudinal axis of rotation. Flat root splines have similar teeth, but are intended to optimize strength for short-term use. Both types of splines are important for ensuring the shaft aligns properly and is not misaligned.
The friction coefficient of the hub is a complex process. When the hub is off-center, the center moves in predictable but irregular motion. Moreover, when the shaft is centered, the center may oscillate between being centered and being off-center. To compensate for this, the torque must be adequate to keep the shaft in its axis during all rotation angles. While straight-sided splines provide similar centering, they have lower misalignment load factors.

Keyed shafts

Essentially, splined shafts have teeth or ridges that fit together to transfer torque. Because splines are not as tall as involute gears, they offer uniform torque transfer. Additionally, they provide the opportunity for torque and rotational changes and improve wear resistance. In addition to their durability, splined shafts are popular in the aerospace industry and provide increased reliability and fatigue life.
Keyed shafts are available in different materials, lengths, and diameters. When used in high-power drive applications, they offer higher torque and rotational speeds. The higher torque they produce helps them deliver power to the gearbox. However, they are not as durable as splined shafts, which is why the latter is usually preferred in these applications. And while they’re more expensive, they’re equally effective when it comes to torque delivery.
Parallel keyed shafts have separate profiles and ridges and are used in applications requiring accuracy and precision. Keyed shafts with rolled splines are 35% stronger than cut splines and are used where precision is essential. These splines also have a smooth finish, which can make them a good choice for precision applications. They also work well with gears and other mechanical systems that require accurate torque transfer.
Carbon steel is another material used for splined shafts. Carbon steel is known for its malleability, and its shallow carbon content helps create reliable motion. However, if you’re looking for something more durable, consider ferrous steel. This type contains metals such as nickel, chromium, and molybdenum. And it’s important to remember that carbon steel is not the only material to consider.