Product Description

CNC milling  Aluminum parts for robots

btslipring

Aluminum can be used for CNC machining and milling in shorter time periods, so for most enterprises, this is a more economical and reasonable option. When the material is exposed to the atmosphere, a protective layer forms on the surface, so the aluminum part provides corrosion resistance in addition to greater strength. Furthermore, the likelihood of seeing rust will also fall. Among other things, machined aluminum components will be malleable, strong, chemical-resistant, and a conductor of electricity which has its obvious benefits.

ByTune can produce different color of surface finish according customer demand, such as natural silver and many color anodized films. We have machined aluminum parts for different industry.
Service & Capability

Materials	Carbon Steel: C1006, C1008, C1571, C1018, C1571, C10B21, C10B33, C1035, C1045, C435#, 40CrMo, 42CrMo
	Stainless Steel: SUS201, SUS302, SUS303, SUS304, SUS316, SUS410, SUS430
	Brass: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200CuZn37), C28000 (CuZn40)
	Bronze: C51000, C52100, C54400, etc
	Aluminum: 6061/6063/7075/5052etc
	Titanium and Titanium Alloy: TAD, TA1-TA8, TB2, TC1-TC10
	Iron: 1213, 12L14, 1215, etc
Process	CNC Turning, CNC Milling,4-axis/5-axis CNC Machining, Punching, Bending, Laser cutting, Water jet cutting, Welding ,etc.
Tolerance	±0.001mm or ±0.00004″
Production Capacity	depend on complicacy of different products and the quantity
Experience	20 years of CNC machining products
Lead Time	making arrangement upon customers’request
Minimum Order	Comply with customer’s demand
Maine Equipment	Machining center, CNC, Lathe, Turning machine, Milling machine, wire cutting machine,Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine,Internal and external grinding machine, Wire cutting machine etc.
Testing Facility	Coordinate measuring machine, projector, roughness

Product Display

Surface Finish Available

Color Anodized	Polishing	Zinc Plating
Clear Anodized	Passivating	Oxide Black
Sandblast Anodized	Sandblasting	Nickel Plating
Chemical Film	Laser Engraving	Chrome Plating
Polishing	Electropolishing	Hot Treatment
Brushing	Spraying	Powder Coated
Chroming	Silk screen LOGO	Carburized

Aluminum 6061 T6:
(1)Features:Improved corrosion resistance over 7075,General purpose aluminum with Medium strength,Good formability, weldability,Containes magnesium and silicon.

(2)Applications:Electronic hardware, prototypes, aircraft fittings, camera lens mounts, couplings, marines fittings and hardware,etc

Aluminum 7075
(1)Features:Higher strength over Aluminum 6061,Good fatigue strength,Better corrosion resistance than the aluminum 2000 alloys.

(2)Applications:Gears and shafts, fuse parts, meter shafts and gears, regulating valve parts, worm gears, keys,aircraft wings, and fuselages, bicycle components,etc.

If you have any other material requirements, please contact us in time, and we will offer our expertise advice for you to produce the feasible and unique laser engraving parts.

Applications
-Spline Shafts,Worm Gears,Dials and Scale,EMI- proof Housings
-Front Panels,Dowel Pins,Optical Reflectors,Medical Devices,Lighting Fixtures

Delivery, shipping and payment
Our delivery is fast and 3 days to have samples of CNC machining parts ready. The raw material purchase of the CNC machining Parts is completed in 1 day.
1)Within 24 hours quotation;
2)3 days for samples preparation;
3)2 weeks for batch regular order;
4)Reliable package
5)Samples payment by PayPal or western union;
6)TT for regular PO;

FAQs
 Q1: I want to keep our design in secret, can we sign NDA?
Sure, we do not display any customers’ design or show to other people, we can sign NDA.

Q2: Can you advise on suitable materials for us?
A: Yes, we are very knowledgeable and can recommend the best grade materials for your application.

Q3: If I need the parts urgent, can you help?
Yes, we are here to help. Production time is flexible .If you need the parts urgent, please tell us the delivery time you need. We will do our best to adjust the production schedule priority.

Q4: Are you CZPT to design or produce new products for us?
A: We are always willing to develop new products according to the clients’ requirements, we are experienced in CNC machining parts, so when you have samples or drawing needing a factory to develop for you, we will try our best to help you.

Welcome to Visited Our Website: btslipring
ByTune is a professional manufacturer of CNC machining parts who has 20 years industry experience.If you are founding a reliable cooperator of CNC machinery parts,please do’t hesitate consult us

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.