Product Description
Product Description
Excellent Performance and Strong Durable 25ton 10wheel Dump Truck with High Quality
Strong load-bearing capacity: The 25-ton mining truck has a large load-bearing capacity, which can meet the transportation needs of large quantities of materials in the mining site, improve work efficiency and production benefits.
Strong adaptability: The 25-ton mining truck has strong off-road and pass-through capabilities, can adapt to the complex terrain and environment in the mining area, and meet the needs of different working scenarios.
High reliability: The 25-ton mining truck has a sturdy and durable structure, can withstand heavy loads and high-intensity work in mining operations, and has good seismic and safety performance. It can operate for a long time in harsh working environments.
Easy maintenance: The design structure of the 25-ton mining truck is simple, easy to maintain and care, reducing the failure rate and maintenance costs.
Cost advantage: Compared with other types of mining vehicles, the 25-ton mining truck has a relatively low price, has a good cost performance, and can save costs for mining enterprises.
Product Parameters
| Product model | MT20 |
| Driving style | Side drive spring seat height of seat 1300mm |
| Fuel category | diesel |
| Engine model | YC6L330-T300 cooling and turbocharge |
| Engine power | 243KW(330hp) |
| gearbox model | 7DS100 Single-box double middle axle structure, ZheJiang Fast 7-speed gearbox. |
| rear axle | The parallel rear axle has a carrying capacity of 32 tons. |
| front axle | Single axle load-bearing capacity: 6.5 tons. |
| Braking method | Independent circulating hydraulic brake system, hydraulic brake and pneumatic control, parking brake valve. |
| Hydraulic system. | Mid-position single-acting multi-segment hydraulic cylinder with dual cylinders, oil tank equipped with filter element, liquid level gauge, and ruler. Hydraulic valve and manual pneumatic control valve with slow descent function. Hydraulic reversing valve with load limiting function, compatible with mechanical industry standard interface gear pump, inlet and outlet ports rearward, rated pressure of 190bar, maximum pressure of 240bar. |
| Cabin | All-steel driver’s cab with iron and zinc paint treatment. Off-center driver’s cab with 1 radiator cover, oil sump anti-collision guard plate, four-point mechanical fixed driver’s cab, and rear engine hood. |
| Front wheel track | 1350mm |
| Rear wheel track | 1850mm |
| Front and middle wheelbase | 3650mm |
| Middle and rear wheelbase | 1350mm |
| Minimum clearance | 260mm |
| frame | Frame width: 850mm, main beam section size: 270x80x(8+8)mm. |
| Unloading method | Rear unloading double support 130*2000mm |
| overall dimension | 7500*2480*2550mm |
| cargo box dimension | Mining cargo box, rear door with double hinge seat structure, bottom thickness of 12mm, side thickness of 8mm, made of high-strength steel plate. 4500*2320*850mm |
| cargo box volume(m³) | 8.8m³ |
| Maximum lifting angle of the cargo box. | 41° |
| load capacity /ton | 25ton |
| turning radius | 9600mm |
| Curb weight of the entire vehicle ( kg). | 11500KG |
| Maximum gross vehicle weight (kg). | 31500KG |
| Maximum loading capacity (kg). | 20000KG |
Detailed Photos
Packaging & Shipping
Our tricycles and 4 wheel dump trucks are exported to Zambia,Peru, Laos,Xihu (West Lake) Dis.via,Ecudoar, Malaysia,Cango,Chile ,brazil and etc over 30 countries!
As shown in the packaging image on the left, our mining dump trucks are usually packaged in 2 forms, SKD and CKD, according to customer requirements.
Company Profile
ZheJiang Xihu (West Lake) Dis.e Machinery Co., Ltd is located in HangZhou, ZheJiang Province, China. The main products are mining dump trucks, mining loaders, mining articulated trucks, and other mining, construction, and agricultural equipment. It is a comprehensive high-tech enterprise integrating product design and development, manufacturing, and domestic and foreign sales.
FAQ
1,Are you factory or trade company ?
We are factory and We have been producing mining dump trucks for over 20 years.
2,,What is the minimum order quantity for your mining dump trucks?
The minimum order quantity can vary depending on the specific product model and customer requirements. We will provide suggestions based on the actual situation.
3,Can you provide quality certificates and inspection reports for your products?
Yes, we can provide quality certificates and inspection reports for our products to demonstrate compliance with relevant standards and regulations.
4,Is it possible to provide on-site demonstrations or trials?
Yes, we can arrange on-site demonstrations or trials to help customers better understand our products’ features and performance.
5,What is the delivery time after ordering? Is there a risk of delayed delivery?
The delivery time can vary depending on the order quantity and product model, but we will inform customers of the specific delivery time after the order is confirmed. We will take all necessary measures to ensure timely delivery and reduce the risk of delays.
6,Can you customize products according to customer requirements?
Yes, we can customize products according to customer requirements to meet specific needs and requirements.
7,Do you provide after-sales service and technical support after ordering? How can customers contact your after-sales service team? Answer: Yes, we provide after-sales service and technical support after ordering. Customers can contact our after-sales service team through email, phone, or online customer service. We will respond as soon as possible to solve customers’ problems.
8,What’s your payment terms?
T/T: 30% deposit by T/T,70% balance should be paid before shipment.
9,Are special authorization or licensing required for installing and operating your mining dump trucks?
Generally, special authorization or licensing is not required for installing and operating our mining dump trucks. However, the specific situation may depend on local regulations and standards. We provide installation and operation instructions to ensure the correctness and safety of the use of our products.
Customer
More product
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Avalibale |
|---|---|
| Warranty: | 1 Year |
| Transmission Type: | Automatic |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can you provide insights into the maintenance of axle bearings for smooth operation?
Maintaining axle bearings is essential for ensuring smooth operation, longevity, and optimal performance of a vehicle’s axle system. Here are some insights into the maintenance of axle bearings:
1. Regular Inspection:
Perform regular visual inspections of the axle bearings to check for any signs of wear, damage, or leaks. Look for indications such as excessive play, unusual noises, vibration, or leakage of grease. Inspections should be carried out as per the manufacturer’s recommended intervals or during routine maintenance checks.
2. Lubrication:
Adequate lubrication is crucial for the smooth operation of axle bearings. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for greasing. Over-greasing or under-greasing can lead to bearing damage or failure. Ensure that the proper amount of grease is applied to the bearings, and use a high-quality grease that is compatible with the axle bearing specifications.
3. Seal Inspection and Replacement:
Check the condition of the axle bearing seals regularly. The seals help to keep contaminants out and retain the lubricating grease within the bearing. If the seals are damaged, worn, or show signs of leakage, they should be replaced promptly to prevent dirt, water, or debris from entering the bearing assembly and causing damage.
4. Proper Installation:
During axle bearing replacement or installation, it is crucial to follow proper procedures to ensure correct seating and alignment. Improper installation can lead to premature bearing failure and other issues. Refer to the manufacturer’s instructions or consult a professional mechanic to ensure proper installation techniques are followed.
5. Load Capacity and Alignment:
Ensure that the axle bearings are properly sized and rated to handle the load capacity of the vehicle and the specific application. Overloading the bearings can lead to excessive wear and premature failure. Additionally, proper wheel alignment is important to prevent uneven bearing wear. Regularly check and adjust the wheel alignment if necessary.
6. Environmental Considerations:
Take into account the operating conditions and environment in which the vehicle is used. Extreme temperatures, exposure to water, dirt, or corrosive substances can affect the performance of axle bearings. In such cases, additional preventive measures may be necessary, such as more frequent inspections, cleaning, and lubrication.
7. Professional Maintenance:
If you are unsure about performing maintenance on axle bearings yourself or if you encounter complex issues, it is recommended to seek assistance from a qualified mechanic or technician who has experience with axle systems. They can provide expert advice, perform necessary repairs or replacements, and ensure proper maintenance of the axle bearings.
By following these maintenance insights, you can help ensure the smooth operation, longevity, and reliability of axle bearings, contributing to the overall performance and safety of the vehicle.
Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?
Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:
- Regular Inspection:
- Lubrication:
- Seal Inspection and Replacement:
- Proper Loading and Towing:
- Driving Techniques:
- Regular Wheel Alignment:
- Proper Tire Inflation:
- Service Intervals:
Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.
Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.
Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.
Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.
Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.
Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.
Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.
Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.
It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.
What are the signs of a worn or failing axle, and how can I troubleshoot axle issues?
Identifying the signs of a worn or failing axle is important for maintaining the safety and functionality of your vehicle. Here are some common signs to look out for and troubleshooting steps you can take to diagnose potential axle issues:
- Unusual Noises:
- Vibrations:
- Uneven Tire Wear:
- Difficulty Steering:
- Visible Damage or Leaks:
- Professional Inspection:
If you hear clunking, clicking, or grinding noises coming from the area around the wheels, it could indicate a problem with the axle. These noises may occur during acceleration, deceleration, or when turning. Troubleshoot by listening carefully to the location and timing of the noises to help pinpoint the affected axle.
A worn or failing axle can cause vibrations that can be felt through the steering wheel, floorboard, or seat. These vibrations may occur at certain speeds or during specific driving conditions. If you experience unusual vibrations, it’s important to investigate the cause, as it could be related to axle problems.
Inspect your tires for uneven wear patterns. Excessive wear on the inner or outer edges of the tires can be an indication of axle issues. Misaligned or damaged axles can cause the tires to tilt, leading to uneven tire wear. Regularly check your tires for signs of wear and take note of any abnormalities.
A worn or damaged axle can affect steering performance. If you experience difficulty in steering, such as stiffness, looseness, or a feeling of the vehicle pulling to one side, it may be due to axle problems. Pay attention to any changes in steering responsiveness and address them promptly.
Inspect the axles visually for any signs of damage or leaks. Look for cracks, bends, or visible fluid leaks around the axle boots or seals. Damaged or leaking axles can lead to lubrication loss and accelerated wear. If you notice any visible issues, it’s important to have them inspected and repaired by a qualified mechanic.
If you suspect axle issues but are unsure about the exact cause, it’s advisable to seek a professional inspection. A qualified mechanic can perform a thorough examination of the axles, suspension components, and related systems. They have the expertise and tools to diagnose axle problems accurately and recommend the appropriate repairs.
It’s important to note that troubleshooting axle issues can sometimes be challenging, as symptoms may overlap with other mechanical problems. If you’re uncertain about diagnosing or repairing axle issues on your own, it’s recommended to consult a professional mechanic. They can provide a proper diagnosis, ensure the correct repairs are performed, and help maintain the safety and performance of your vehicle.
editor by CX 2024-02-04